1、 Site selection principles;

The site selection of a dust-free workshop should follow the principles of convenient production, convenient living, investment saving, and operating expenses. The factory site should be located in a natural environment with good water quality, low air dust concentration, and a microclimate with terrain, topography, and topography that helps production and energy conservation. It should be far away from areas with many dust, smoke, toxic gases, and microorganisms, such as airports, railways, ports, transportation, etc. The pollution source and main wind direction should be on the windward side throughout the year, and there should be a certain protective distance. The distance between the dust-free workshop and the main road should be more than 50 meters.

2、 Clean workshop decoration design layout;

A dust-free workshop usually consists of three parts: a clean area, a quasi clean area, and an auxiliary clean area. The layout of the dust-free workshop can be carried out in the following ways:

The type of external corridor: The external corridor can have windows or no windows, and can be used for visiting and placing some equipment. Some are on duty for heating on the external corridor. External windows require double sealing.

Inner corridor style: The clean workshop is located on the periphery, while the corridor is located indoors. The cleanliness level of such corridors is usually relatively high, even at the same level as the clean workshop.

Two end type: one end is equipped with a clean area, and the other end is equipped with a quasi clean auxiliary room.

Core type: In order to save land and shorten pipelines, the clean area can be the core, surrounded by various auxiliary rooms and hidden pipeline spaces. This not only avoids the impact of outdoor climate on clean areas, but also reduces cold and hot energy consumption, which is beneficial for energy conservation.

3、 Selection of dust-free materials in the workshop;

1. Good cleaning performance, no dust adsorption, very suitable for purifying workshop walls, and very energy-saving and environmentally friendly, with a beautiful appearance. It is cost-effective and can significantly reduce the use of funds by creating one or more workshops.

2. Convenient construction and light weight: 10-14 kilograms per square meter, equivalent to 1/30 of a brick wall. The partition wall and roof of the purification plant are usually made of 50mm thick plywood; And the color steel plate equipment is proactive and convenient: the construction cycle is short, and the workshop can be adjusted according to production needs. The use of color steel plate walls makes the workshop renovation construction more convenient.

3. Air supply filtration equipment: The air supply adopts a stainless steel structure, which is aesthetically disinfected. The perforated mesh plate is made of aluminum paint, which is rust free, dust-free, and easy to disinfect; The return air duct is made of heat transfer zinc plate and pasted with purified insulation cotton.

4. Treatment of the ground: The ground is usually made of epoxy arf flooring or high wear-resistant plastic flooring. If there is a need for anti-static, anti-static flooring can be used.